A Tilehurst company - serving San Jose, CA

IKO Gutter Replacement Nationwide

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

IKO Gutter Replacement: The San Jose Owner’s Guide

If you have an IKO roof with failing gutters, here’s the straight answer: we stock and install IKO-compatible gutter replacement in San Jose for most single-story homes at $18 – $32 per linear foot installed, and standard runs take one crew day for a typical 120 – 160 linear foot home. That price includes removing the old sections, matching the profile to your IKO shingle overhang, resealing all end caps and corner miters, and hauling away the old metal. Most San Jose homeowners discover they need this when they see water spilling over the front edge during winter rains, or when a downspout has pulled away from the fascia board and the gutter is holding a sag of water instead of moving it.

Call (669) 274-0078

We’re Tilehurst Roofing San Jose, and we’re an independent local contractor, not a corporate arm of IKO. What we are is a company that keeps correct-fit gutter profiles and matching downspout sizes on hand for IKO roof systems, because around here, a gutter that doesn’t line up with an IKO drip edge is a gutter that leaks behind the fascia by March.

Which IKO Models This Applies To

IKO doesn’t make gutters under its own brand, but its shingle lines have specific drip-edge and overhang dimensions that dictate which gutter profiles work. The relevant family is broad: Cambridge, Dynasty, Nordic, Royal Estate, and Marathon all sit on IKO’s standard 5-inch exposure with a 3/4-inch shingle overhang at the eave. That means a 5-inch K-style aluminum gutter is the correct match in nearly every case, with a 3/4-inch offset at the mounting bracket so water sheds cleanly off the shingle edge and into the trough.

The gotcha comes with older IKO roofs and in neighborhoods where homes were re-roofed without updating the gutters. If your IKO shingles were installed over the original wood shiplap or a second underlayment layer, the effective overhang can grow to 1-1/8 inch, which puts the shingle edge past the back lip of a standard 5K gutter. Water then runs behind the gutter, down the fascia, and into the soffit. In those cases we step up to a 6-inch profile or add a gutter apron strip. That’s the kind of compatibility detail we check before we quote, because the last thing a San Jose homeowner needs is a new gutter that misses the water.

On the OEM-versus-aftermarket question: because IKO doesn’t manufacture gutters, there’s no such thing as an “IKO OEM gutter” to hunt for. What matters is the gauge and finish of the aluminum. We run with .032-gauge stock as standard, not the .027-gauge you’ll find at big-box home centers, because the thinner metal oil-cans in San Jose’s summer heat and starts to sag at the bracket points after a few years. If your home is in a tree-heavy pocket like Willow Glen or the Rose Garden, we often recommend .040-gauge for the extra rigidity against leaf weight and ladder contact.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your IKO Gutter Replacement Is Failing

  • Water spilling over the front edge during steady rain. This usually means the gutter pitch has flattened, often because the aluminum has flexed under repeated heat cycles or a bracket has pulled loose. Water follows the path of least resistance, and a flat gutter turns into an overflow shelf.
  • Heavy gutters or visible sagging between brackets. Brackets on older IKO homes were often spaced 32 inches apart to save money at the original install. Over time the gutter belly grows between those points and standing water gets heavier, pulling the whole run further down.
  • Dark mineral staining just below the roof edge. That’s asphalt granule runoff from IKO shingles washing down the fascia. It means water is getting behind the gutter or the drip edge has separated, and it’s a sign your gutter placement was never adjusted to your shingle overhang.
  • Corner miters or end caps leaking. These are sealant joints, and sealant dies in the South Bay. A joint that opened up means water is hitting your foundation or your entry walkway every time it rains, and no amount of caulk from a tube will fix it for more than a season.
  • Fascia board softness or paint peeling behind the gutter. This is the late-stage symptom. The gutter has been leaking into the wood long enough that the board is starting to rot. Replacing the gutter without addressing the fascia is a half-fix, and we’ll tell you that before we write the quote.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the price range in real dollars for San Jose. For a standard single-story home with 120 to 160 linear feet of gutter, installed replacement runs $2,200 to $5,100. That includes removal and disposal of the old aluminum, new .032-gauge 5K or 6K gutter in a color matched to your fascia and IKO shingle blend, new hidden or bracket-style hangers at 24-inch spacing, sealed corners and end caps, reconnected downspouts, and a final pitch check with a running water test.

What drives the range: whether you need 5-inch or 6-inch, .032 or .040 gauge, how many corners your roofline has, how rotted the fascia is behind the old gutter, and whether you have a two-story section that needs lift work. We line-item every one of those in the written price, so you know exactly what you’re paying for before we start. Every gutter replacement from Tilehurst Roofing San Jose carries our written guarantee, and if anything we touched fails inside that window, we come back and fix it at no charge under the 365-Day Done Right Promise. Greg Holloway built Tilehurst around that promise, and he’s kept it on every gutter job we’ve run in San Jose.

DIY or Call Us?

What you can safely check yourself: whether downspouts are clear, whether brackets are pulling out, and whether water is spilling over the front edge versus running behind the gutter. Those observations help us quote accurately over the phone. What goes wrong with DIY on this job: a gutter that isn’t pitched correctly is worse than no gutter at all, and working off a ladder at the eave line with a 10-foot section of aluminum in the wind is how a homeowner ends up in urgent care. We’re not going to dress that up.

If you’re comfortable clearing a downspout and watching where the water goes, do it. Then call me and tell me what you saw.

If you want the gutter run replaced and know it’ll be pitched right the first time, that’s what we do every week from Alum Rock to Almaden Valley. Call (669) 274-0078 for a free written estimate. We answer the phone.

FAQs

Need Roofing help in San Jose? Licensed & insured · Free on-site estimates response · free estimates
Call (669) 274-0078
Local Service Coverage

Request a Free Estimate in San Jose

Tell us what you need - Tilehurst Roofing San Jose responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and consent to being contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch