Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Mountain View
Roof repair in Mountain View comes down to two things: knowing the local housing stock and knowing the local code. Most asphalt shingle repairs here run $350 – $850, while valley repairs and flashing work typically land between $450 – $1,100. We’re a local Roof Repair team that works on the ranch homes and contemporary rebuilds you see on every street in this city. If you’ve got a leak over the kitchen or a patch of shingles lifting on the north slope, call (669) 274-0078. You’ll reach a live person, day or night, and we’ll give you a written price before anyone climbs a ladder.
Why Tilehurst Roofing San Jose Is Mountain View’s Preferred Roof Repair Company
Mountain View is a specific kind of roofing market. Half the homes here were built between 1955 and 1975, and many of them still carry their original wood shake or early composition shingle. The other half are new construction, built with flat membrane roofs and standing seam metal. Greg Holloway, who leads our crew, has spent years working both sides of that divide. Our technicians are background-checked and uniformed, so the person who knocks on your door on Whisman Station or Rex Manor is the person who will stand on your roof and explain exactly what needs repair.
We answer every call live, 24 hours a day. When a Mountain View homeowner calls about a leak at 9pm on a Sunday, a person picks up, not voicemail. Our dispatch is coordinated from the San Francisco Bay Area office, and our crews work Mountain View neighborhoods daily. The Kingswell family of roofing companies was founded in 2000, and every repair we complete here carries a written guarantee delivered before the crew packs up and leaves. If a repair fails inside the guarantee period, we return at no charge under the 365-Day Done Right Promise.
Styles & brands we work with
Storm Damage Roof Repair in Mountain View
Storm Damage Roof Repair in Mountain View usually means one thing: a wet winter storm found the weak spot that three dry summers created. Long, hot summers make wood shakes and old composition shingles brittle. Then a heavy rain event hits, the wind gets underneath a lifted edge, and water reaches the underlayment, which by now has degraded to the point where it might as well not be there. A storm-damage repair of this kind in Mountain View typically costs $400 – $1,300 depending on what the sheathing looks like once we get the surface layers off.
Wind-Load Repair Standards
Mountain View requires roofing materials to meet wind-load standards based on a basic wind speed of 110 mph, Risk Category II, with Exposure B or C. That translates to specific nailing patterns: six nails per shingle on steep slopes, proper starter strip placement, and flashing details that a cheap patch job skips entirely. When we repair storm damage here, we re-nail to that standard, not just to “good enough.”
Working Through Insurers
After a storm, insurance companies want documentation. If your Mountain View roof repair isn’t documented to current wind-load code, the adjuster will notice. We provide the paperwork: photos of what was removed, what was installed, fastening patterns, and the finished condition. That documentation supports your claim now and helps if a future storm causes damage in the same area.
Metal Roof Repair in Mountain View
Metal Roof Repair in Mountain View is increasingly common as more homeowners move to standing seam for its longevity and the sleek look it gives a mid-century rebuild. Repairs on a standing seam metal roof in Mountain View typically cost $500 – $1,500, depending on whether we’re replacing a panel, re-securing fasteners, or addressing leak points at seams and penetrations. The older the metal roof, the more likely its fasteners have backed out after years of thermal expansion and contraction.
Seam and Fastener Leaks
Standing seam is a great system until a seal fails at a seam or around a roof penetration. On steeper slopes, panel-lift at the eave is the most common failure we see. The fix usually involves re-securing fasteners, re-applying sealant at the seams, and checking the clip system under the panel. On low-slope metal systems, ponding at the lap joints leads to corrosion and pinhole leaks.
Repairs That Match the Original
Metal roof repair has to blend visually. We match panel profile, gauge, and color as closely as the manufacturer’s current line allows. Mountain View’s mix of original mid-century homes and contemporary rebuilds means we carry multiple metal profiles and finishes, so we’re not telling you to live with a repair that looks like a patch. Our crew will show you the match before we order it.
Trusted Brands We Service in Mountain View
We install and repair materials from all seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That matters in Mountain View, because a 1962 ranch in Waverly Park and a 2020 two-story in Shoreline West have different needs. We stock GAF and Tamko shingles locally for fast turnaround on standard repairs. Atlas and Boral products are available within a couple of days for specialized jobs. Your home gets the product that fits the roof and the architecture, not whatever happens to be on the truck that morning. Every repair also carries our written guarantee, regardless of which manufacturer’s product we install.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Mountain View Homes
- Brittle shakes and shingles that crack and lift. Mountain View’s long dry summers dry out wood shakes and older composition shingles. When winter rain arrives, water gets under the lifted edges and past degraded underlayment. We see this most on original 1960s roofs in Waverly Park and Rex Manor.
- Mixed patches that trap moisture. A previous owner patched a shake roof with composition shingles. The materials expand and contract at different rates, trapping moisture at the seams. Beneath those patches, the original 1960s plywood decking is often rotting, turning a small leak into a full deck replacement.
- Low-slope roofs with undersized drainage. Ranch homes in Mountain View were often built with minimal slope and a single scupper or downspout per corner. During heavy rain, water overflows the edges or pools around penetrations, causing ceiling damage before anyone notices a leak at all.
- Flashing failures at valleys and chimneys. Where two roof planes meet or where a chimney penetrates the roof, old galvanized flashing corrodes. On homes near Shoreline Park, the salt-influenced air speeds that process. Valley leaks often look like shingle problems but are actually flashing failures underneath.
Pricing for Roof Repair in Mountain View, CA
Here are honest ranges for what we charge in Mountain View. Minor shingle replacement: $350 – $850. Flashing repair around a chimney or skylight: $450 – $1,100. Valley repair: $500 – $1,300. Flat roof patch on a TPO or PVC membrane: $600 – $1,500. Storm damage repair involving decking replacement: $800 – $2,200. Vent boot repair: $250 – $550. What moves a repair toward the high end of these ranges is what we find under the shingles: rotted decking, failed underlayment, or damage from a prior patch job. You’ll get a written line-item price before any work starts, and that price doesn’t change at the door. Call (669) 274-0078 to schedule a free estimate.
We Also Serve Cities Near Mountain View
Our crews work throughout the South Bay and Peninsula. In addition to Mountain View, we handle roof repairs in Cupertino, Menlo Park, Santa Clara, and Campbell. If you’re in one of those cities and dealing with a leak or storm damage, the same written-price guarantee and 365-Day Done Right Promise apply. Call us and a live person will answer, wherever in the area your roof happens to be.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Mountain View
Most repairs under 100 square feet don’t require a permit in Mountain View, as long as you’re not replacing the roof structure or changing the roof covering type. A full tear-off or a material change from shake to shingle does require a permit. We tell you during the free estimate whether your repair falls under the permit threshold. Call (669) 274-0078 and we’ll walk you through what your specific roof needs.
Mountain View requires roofing materials and fastening to meet a basic wind speed of 110 mph, Risk Category II, with Exposure B or C. In practice, that means six nails per shingle on steep slopes, correct starter strips, and flashing details rated for the exposure on your specific roof. A cheap patch that uses four nails per shingle and skips the flashing is not compliant, and your insurer may deny a future claim because of it. Our estimates always include the full nailing pattern and flashing scope, and we document it in the written quote.
In Mountain View, the most common cause is hidden rot in the 1960s plywood decking, especially on original Waverly Park shake roofs that have been patched with mismatched materials. The shingles look fine from the ground because the problem is underneath: rotted sheathing, failed underlayment, or corroded flashing at the valleys. A surface patch over rotten decking will leak again, no matter how well it’s nailed. When we repair a roof here, we open the affected area, inspect the sheathing, and replace anything that’s compromised before we re-cover it. That’s the difference between a patch and a repair that lasts.
We provide a complete documentation package: photos of the damage before work, photos of the stripped roof showing the sheathing condition, the materials and fastening patterns used, and the finished roof. We also note the wind-load rating of the products installed. This paperwork is designed to satisfy an adjuster who needs to verify the repair met Mountain View’s 110 mph wind-load requirement. Call (669) 274-0078 before you file your claim and we’ll help you understand what your insurer will ask for.
Yes, we can repair just the valleys on a Waverly Park shake roof, but we need to see the condition of the decking underneath first. On a 1960s shake roof that’s been patched multiple times, the valley flashing is often corroded and the plywood underneath is rotting. If the rot is localized, we replace that section of decking, install new valley flashing, and re-cover. If the rot has spread across multiple valleys or the shakes are failing everywhere, a full replacement may be the honest recommendation. We’ll show you photos of what we find before any work is authorized. Call (669) 274-0078 for a free inspection and a written repair or replacement quote.
Mountain View’s blend of 1950s-70s ranch homes and modern Google-driven rebuilds creates a roofing market where we must handle both aging wood shake tear-offs and sleek standing-seam metal installations, often on the same street. On the tree-lined streets of Waverly Park, we regularly find original 1960s shake roofs that have been repeatedly patched due to deferred maintenance, resulting in mixed materials and hidden rot in the plywood decking. A roofing company that only does new construction or only does patch work can’t serve that split market well. We can. Call (669) 274-0078 and tell us what you’re seeing, and we’ll give you a straight answer and a written price.
Written by Greg Holloway, Owner at Tilehurst Roofing San Jose, serving Mountain View and the South Bay.